Expert Answers about Bungee Cords

• Type Of Hooks On Erickson Bungee Cord
• The Erickson Bungee Cord, Item # EM07037, comes with 2 aluminum carabiners that are on each end of the bungee cord. The "hooks" are rustproof and have spring-loaded keepers that allow for quick, easy, and secure connections. The Erickson Bungee Cord has an unstretched length of 18 inches and is very durable.
  view full answer...


• How are Classic Accessories # 052963762501 RV Wheel Covers Held In Place
• The Classic Accessories Wheel Covers you mentioned, part # 052963762501 use an elastic band on the rear of the cover that applies tension, which holds the cover in place. The cover does not have grommets for attaching a bungee cord.
  view full answer...


• Industrial Bungee Chords Dependability Under Sun Exposure
• The Erickson Industrial Power Pull Bungee Cord - Wire Hooks w/ Pull Loops - 30" Long # EM06666 are intended to be used for either indoor or outdoor applications. They come with a 90 day warranty and I haven't heard of any cracks or breaks with them. They have a woven material to help with the initial UV ray impact so the rubber isn't directly impacted. Unfortunately I have no way of testing them for long term sun exposure under the same conditions you have, I only have the customer reviews...
  view full answer...


• Can I Put A Rooftop Cargo Bag In A Hitch Mounted Cargo Carrier?
• You can absolutely use a rooftop cargo bag with the Curt hitch mounted cargo carrier # C18152. You will want to take extra steps to secure the bag such as ratchet straps or bungee cords. Make sure you keep as much of the bag in the carrier as possible, and try to limit any overhang. Using a stretchable cargo net like the # C18202 may really help to keep everything in place.
  view full answer...


• Does Tow-Rax Wall Mounted Aluminum Folding Table # TWSP45HFTA Lock When in Folded Position
• The Tow-Rax Wall Mounted Aluminum Folding Table # TWSP45HFTA does not lock in the folded position. I confirmed this with my contact at Tow-Rax. It does lock in the up position. If you want to have the folded table top secure during travel we offer rubber bungee cords like the 30-inch # EM06736.
  view full answer...


• Does The VanTred Custom Floor Mat Allow Totes With Casters To Roll Freely
• The VanTred Custom Floor Mat for Cargo Vans # VTRG96 would allow totes with casters to roll around easily so you'd need to lock the casters or find a way to hold the totes in places with a strap or bungee cord. Since this mat has a closed cell polypropylene layer to cushion the top you'll also see tracks wherever the totes sit and roll, depending on how heavy they are.
  view full answer...


• How to Hold Latch of BDGN240200 Gooseneck Trailer Coupler in Place While Lowering Trailer onto Ball
• The Bulldog # BDGN240200 is perfect for this application, as it's self latching. Lower the coupler onto the gooseneck ball and the coupler will self latch once it hits bottom on the ball. To un-latch and hold the coupler open, I'd recommend using a bungee cord like # 348509, put one hook in the hole on the latch handle and the other hook to a tie-down in the bed or a stake pocket.
  view full answer...


• Is Any Accessory Available To Hold DeeZee Specialty Series Storage Box Lid Fully Open
• I called my contact at DeeZee about the Specialty Series Storage Box, part # DZ6537P. They told me there is no accessory available to hold the box lid open. I asked if you were able to find a small hydraulic arm and installed it if that would work and they told me any modification would void the warranty. I recommend using a bungee or rope or cord with a hook to hold the lid open when needed. That way you would not need to modify the storage box and retain the warranty.
  view full answer...


• Can Lid Portion of Carpod Walled Folding Cargo Carrier # M2205-01-02 Remain in Place When Folded
• According to my contact at Carpod their Walled Folding Cargo Carrier # M2205-01-02 has a lid that cannot remain in place the when unit is folded up for storage because the lid needs to be installed when the side-walls are upright. However, you can simply fold the side-walls down and put the top lid on top of them and bungee cord the lid (with an item like # EM06701) so it won't fall off. Then fold up the carrier to the back of the car. This way you do not need to store the lid inside the...
  view full answer...


• Classic Accessories RV Wheel Covers Part # CA80083 Ability to Withstand High Winds
• The Classic Accessories RV Wheel Covers, part # CA80083, features an elastic hem on the top/rear of the cover that helps grip the tire at the top, where it is most likely to catch wind moving under the RV. You may want to review the comments from other purchasers of this product, whose experiences might be helpful in your decision-making process. If you return to the product page for this item and scroll down to the Customer Reviews section you will be able to see what other customers thought...
  view full answer...


• What Handlebar Holder do You Recommend for Easy Bike Loading on a Bike Rack?
• Thank you so much for the suggestion and your purchase with us! While we do not carry one exactly like your model, we do carry the Feedback Sports Flop Stop Handlebar Holder # 301-13981 that achieves the same front-wheel stability and ease of loading as the Park Tool holder. It also has a telescoping bar that adjusts 20-35 inches to fit a variety of bike frame styles. However, it is important to note that this should not serve as a replacement for a bike frame adapter bar like the Swagman...
  view full answer...